Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A Contactor for RGS120LDCB0AAA — 24V Coil | Ships Today
ICP

ICP 2-Pole 30A Contactor for RGS120LDCB0AAA — 24V Coil | Ships Today

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is a genuine OEM 2-pole definite-purpose contactor (part number 1178074) for the ICP/Tempstar/Heil RGS120LDCB0AAA. Rated for 30 amps per pole with a 24-volt control coil, the contactor is the electromagnetic switch that energizes the high-voltage circuit when the thermostat or control board calls for operation. When the 24V coil is energized, the contacts close and pass line voltage to the connected load; when the call ends, the spring-loaded contacts open. Contactors are one of the most common failure points in HVAC equipment because the contacts arc and pit every time they open and close. Symptoms of a failing contactor include chattering or buzzing, contacts that weld shut (equipment runs continuously), pitted or blackened contacts, or a coil that no longer pulls in the contacts.

Specifications

Spec Value
Part Number 1178074
Type Definite-Purpose Contactor
Brand ICP / Tempstar / Heil
Poles 2-Pole
Contact Rating 30 Amps
Coil Voltage 24 VAC
Fitment RGS120LDCB0AAA

Compatibility

Direct OEM replacement for the ICP/Tempstar/Heil RGS120LDCB0AAA gas furnace and related family models. Always confirm the part number on your existing contactor matches 1178074 before ordering, and verify the coil voltage and amp rating against your equipment's wiring diagram.

Installation Guide

  1. Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter before touching any wiring.
  2. Access — Remove the service panel to expose the control compartment.
  3. Document — Photograph all line and low-voltage wire positions before disconnecting anything.
  4. Remove — Label and disconnect the line, load, and 24V coil leads, then unscrew the old contactor from its mounting bracket.
  5. Install — Mount the new contactor, then reconnect each wire exactly per your photo and labels.
  6. Test — Restore power and confirm the contacts pull in cleanly on a call with no chatter.

Signs You Need a Replacement

  • Loud buzzing, humming, or chattering from the contactor when energized
  • Equipment runs nonstop because the contacts have welded closed
  • Visibly pitted, burned, or blackened contact points
  • Coil energizes but the contacts fail to pull in

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS120LDCB0AAA — 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS120LDCB0AAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS120LDCB0AAA — 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online