What amp contactor do I need for my ICP system?

The correct replacement for ICP model RGS102HTBB0AAA — 24V Coil OEM 1178074 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102HTBB0AAA — 24V Coil OEM 1178074 | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 30A Contactor for RGS102HTBB0AAA — 24V Coil OEM 1178074 | Ships Today

Name: ICP 2-Pole 30A Contactor for RGS102HTBB0AAA — 24V Coil OEM 1178074 | Ships Today
Brand: ICP
SKU: 1178074-GEN
Price: 29.95 USD
Availability: InStock

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

Genuine OEM 2-pole, 30-amp contactor with a 24V coil (part #1178074) for the ICP / Tempstar / Heil RGS102HTBB0AAA system. The contactor is the electrically controlled switch that energizes the high-voltage load when the 24V control signal calls for operation. Over time the contacts pit, weld, or burn, and the coil can fail open — causing the system to fail to start, chatter, or stay energized when it should be off. This two-pole, 30A device switches both legs of the line voltage from a single 24V coil.

Specifications

Spec	Value
Part Number	1178074
Type	Definite Purpose Contactor
Brand	ICP / Tempstar / Heil
Poles	2-Pole
Contact Rating	30A
Coil Voltage	24V
Fits Model	RGS102HTBB0AAA
Fitment	OEM Direct Replacement

Compatibility

Built for the ICP-family RGS102HTBB0AAA system (Tempstar, Heil, Comfortmaker and related ICP brands). Confirm 2-pole, 30A, 24V coil and part number 1178074 against your existing contactor before ordering.

Installation Guide

Safety First — Disconnect power at the switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the electrical-compartment service panel.
Document — Photograph all line, load, and coil connections before disconnecting any wires.
Remove — Label and disconnect each terminal, then unscrew and remove the old contactor.
Install — Mount the new contactor and reconnect every wire exactly per your photos.
Test — Restore power and confirm the contactor pulls in cleanly and switches the load with no chatter or buzzing.

Signs You Need a Replacement

System won't start or starts intermittently
Loud chattering or buzzing from the contactor
Pitted, welded, or burnt contacts
Load stays energized after the call ends (stuck contacts)

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 30A Contactor for RGS...

$29.95

Frequently Asked Questions

Does this Contactor fit my ICP RGS102HTBB0AAA — 24V Coil OEM 1178074 | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RGS102HTBB0AAA — 24V Coil OEM 1178074 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RGS102HTBB0AAA — 24V Coil OEM 1178074 | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu