What amp contactor do I need for my ICP system?

The correct replacement for ICP model RGS091HEBB0AAAA — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091HEBB0AAAA — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 30A Contactor for RGS091HEBB0AAAA — 24V Coil | Ships Today

Name: ICP 2-Pole 30A Contactor for RGS091HEBB0AAAA — 24V Coil | Ships Today
Brand: ICP
SKU: 1178074-GEN
Price: 28.95 USD
Availability: InStock

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM 2-pole contactor fits the ICP Tempstar/Heil RGS091HEBB0AAAA and is available in 30-amp (part 1178074) and 40-amp (part 1178211) ratings with a 24-volt control coil. The contactor is the electrically operated switch that closes line voltage to the load when the 24V control circuit energizes the coil. Over time the silver contacts pit, burn, and weld from arcing, while the coil can fail open — causing no-start conditions, chattering, or contacts that stick closed. Replacing a worn contactor restores clean, reliable switching and prevents damage to downstream components.

Specifications

Spec	Value
Part Number	1178074 (30A) / 1178211 (40A)
Type	Definite Purpose Contactor
Poles	2-Pole
Contact Rating	30A / 40A
Coil Voltage	24V
Brand	ICP (Tempstar / Heil)

Compatibility

Direct OEM replacement for the ICP / Tempstar / Heil RGS091HEBB0AAAA. Verify whether your unit uses the 30A or 40A rating, and match the coil voltage (24V) and pole count before installing.

Installation Guide

Safety First — Disconnect all power at the breaker/disconnect. Verify zero voltage at the contactor terminals with a multimeter.
Access — Remove the electrical service panel to expose the contactor.
Document — Photograph every wire and terminal position before disconnecting anything.
Remove — Label and remove the line, load, and coil wires, then unscrew the old contactor from its mounting.
Install — Mount the new contactor and reconnect each wire exactly per your photos, confirming coil terminals match the 24V control leads.
Test — Restore power and verify the contactor pulls in cleanly and switches the load without chattering.

Signs You Need a Replacement

Buzzing, chattering, or humming when energized
Pitted, burned, or welded contacts
System won't start even though the coil receives 24V
Contacts stick closed and the load won't shut off

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 30A Contactor for RGS...

$28.95

Frequently Asked Questions

Does this Contactor fit my ICP RGS091HEBB0AAAA — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RGS091HEBB0AAAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RGS091HEBB0AAAA — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu