Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A Contactor for RGS090SRCA0AAA — 24V Coil | Ships Today
ICP

ICP 2-Pole 30A Contactor for RGS090SRCA0AAA — 24V Coil | Ships Today

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This OEM 2-pole definite purpose contactor (part number 1178074) is the electrical switching relay that energizes the compressor and condenser fan motor in your ICP RGS090SRCA0AAA system. Rated for 30 amps with a 24-volt control coil, the contactor receives a low-voltage signal from the thermostat and closes its line-voltage contacts to start the outdoor unit. Over time the silver contacts pit, arc, and weld, or the coil burns out — symptoms include a unit that hums but won't start, chattering at the contactor, intermittent compressor operation, or an outdoor unit that runs continuously because the contacts have fused closed.

Specifications

Spec Value
Part Number 1178074
Type Definite Purpose Contactor, 2-Pole
Brand ICP (Tempstar / Heil / Comfortmaker)
Full Load Amps 30A
Coil Voltage 24V
Poles 2

Compatibility

Engineered as a direct OEM fit for the ICP RGS090SRCA0AAA furnace/condenser platform and shared across many Tempstar, Heil, and Comfortmaker units that use the same 2-pole 30A 24V switching specification. Always confirm the part number on your existing contactor before ordering.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and the main breaker, then verify zero voltage across the line terminals with a multimeter.
  2. Access — Remove the service/control panel from the condensing unit to expose the contactor.
  3. Document — Photograph every wire and terminal position before disconnecting anything.
  4. Remove — Label and disconnect the line, load, and 24V coil leads, then unscrew the old contactor from its bracket.
  5. Install — Mount the new contactor, transfer each wire to the matching terminal per your photo, and torque connections snug.
  6. Test — Restore power, call for cooling, and confirm the coil pulls in cleanly and the compressor and fan energize.

Signs You Need a Replacement

  • Loud chattering or buzzing at the contactor
  • Outdoor unit hums but compressor/fan won't start
  • Burnt, pitted, or welded contacts visible on inspection
  • Condenser runs nonstop because contacts are stuck closed

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS090SRCA0AAA — 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS090SRCA0AAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS090SRCA0AAA — 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online