What amp contactor do I need for my ICP system?

The correct replacement for ICP model RGS303LRFA0AAAA — OEM 1171554 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS303LRFA0AAAA — OEM 1171554 | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 30A 24V Contactor for RGS303LRFA0AAAA — OEM 1171554 | Ships Today

Name: ICP 2-Pole 30A 24V Contactor for RGS303LRFA0AAAA — OEM 1171554 | Ships Today
Brand: ICP
SKU: 1171554
Price: 42.84 USD
Availability: InStock

SKU: 1171554 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM 2-pole contactor (part number 1171554) is rated 30 amps with a 24-volt control coil, built for the ICP / Tempstar / Heil RGS303LRFA0AAAA system. A contactor is the electrically operated switch that closes to send line voltage to the major load when the 24V control signal energizes its coil. Over years of cycling, contactors develop pitted, burned, or welded contacts and weak coils — leading to chattering, no-start conditions, or a unit that won't shut off. Installing a fresh OEM contactor restores reliable, clean switching.

Specifications

Spec	Value
Part Number	1171554
Type	Definite Purpose Contactor
Poles	2-Pole
Contact Rating	30 Amps
Coil Voltage	24 VAC
Brand	ICP (Tempstar / Heil)
Fitment	OEM Replacement

Compatibility

Direct-fit replacement for the ICP / Tempstar / Heil RGS303LRFA0AAAA and related units using a 2-pole, 30A, 24V coil contactor. Confirm the pole count, amp rating, and coil voltage against your existing part before ordering.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter at the contactor terminals.
Access — Remove the electrical/control service panel.
Document — Photograph every line, load, and coil wire before disconnecting.
Remove — Transfer wires one at a time, or label them, then unscrew the old contactor from its mounting.
Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo.
Test — Restore power and confirm the contactor pulls in cleanly with no chatter and the unit energizes.

Signs You Need a Replacement

Buzzing or chattering when the contactor tries to pull in
Pitted, blackened, or welded contacts
System won't start or won't shut off
Coil no longer energizes with 24V applied

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 30A 24V Contactor for...

$42.84

Frequently Asked Questions

Does this Contactor fit my ICP RGS303LRFA0AAAA — OEM 1171554 | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RGS303LRFA0AAAA — OEM 1171554 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RGS303LRFA0AAAA — OEM 1171554 | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu