Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A 24V Contactor for RGS240LTEA0AAAA — OEM 1171554 | Ships Today
ICP

ICP 2-Pole 30A 24V Contactor for RGS240LTEA0AAAA — OEM 1171554 | Ships Today

SKU: 1171554 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

The ICP 2-pole 30-amp contactor (OEM part 1171554) is the electrically operated switch that powers the compressor and condenser fan in your RGS240LTEA0AAAA system. When the thermostat calls, the 24-volt coil pulls the contacts closed and sends line voltage to the compressor and fan; when the call ends, it opens and cuts power. Contactors wear out from millions of switching cycles — the contact points pit, burn, and weld, while the coil can fail open. A bad contactor causes hard starts, chattering, a unit that won't shut off, or no operation at all. This OEM-rated contactor restores clean, reliable switching.

Specifications

Spec Value
Part Number 1171554
Description Contactor, 2-Pole 30A 24V
Type Definite Purpose Contactor
Poles 2-Pole
Contact Rating 30 Amp
Coil Voltage 24 VAC
Brand ICP (Tempstar / Heil / Comfortmaker)
Fits Model RGS240LTEA0AAAA
Fitment OEM Direct Replacement

Compatibility

This 2-pole, 30A, 24V contactor is the OEM replacement for the ICP RGS240LTEA0AAAA and equivalent Tempstar, Heil, and Comfortmaker units that call out part 1171554. Confirm pole count, amp rating, and 24-volt coil voltage match your existing contactor before installing.

Installation Guide

  1. Safety First — Disconnect power at the unit disconnect and breaker. Verify zero voltage at the contactor terminals with a multimeter before touching any wiring.
  2. Access — Remove the electrical-compartment service panel.
  3. Document — Photograph every line, load, and coil wire before disconnecting — terminal placement is critical.
  4. Remove — Disconnect the wires one at a time, remove the contactor mounting screws, and lift out the old contactor.
  5. Install — Mount the new contactor, then reconnect each line, load, and 24V coil wire to the matching terminal per your photos.
  6. Test — Restore power, call for cooling, and confirm the contacts pull in cleanly with no chatter and the compressor and fan energize.

Signs You Need a Replacement

  • Buzzing, humming, or chattering from the contactor
  • Burned, pitted, or welded contact points
  • Unit won't start, or won't shut off when the call ends
  • Compressor hard-starts or trips the breaker

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS240LTEA0AAAA — OEM 1171554 | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS240LTEA0AAAA — OEM 1171554 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS240LTEA0AAAA — OEM 1171554 | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online