What amp contactor do I need for my ICP system?

The correct replacement for ICP model RGS120SEAA0AKAA — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120SEAA0AKAA — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 30A 24V Contactor for RGS120SEAA0AKAA — 24V Coil | Ships Today

Name: ICP 2-Pole 30A 24V Contactor for RGS120SEAA0AKAA — 24V Coil | Ships Today
Brand: ICP
SKU: 1178074
Price: 42.84 USD
Availability: InStock

SKU: 1178074 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 2-pole 30-amp contactor with a 24V coil (part number 1178074) switches the main line-voltage loads in the ICP/Tempstar/Heil RGS120SEAA0AKAA system. When the control circuit energizes the 24V coil, the two 30A poles close to power the compressor and condenser fan; when the call ends, the contactor drops out. Worn contactors show pitted or welded contacts, chattering, a buzzing coil, or a unit that won't start or won't shut off. Replacing it with a genuine OEM 2-pole 30A contactor restores reliable switching and protects the compressor from low-voltage and single-phasing damage.

Specifications

Spec	Value
Part Number	1178074 (CONTACTOR 2P 30A 24V)
Type	2-Pole Definite Purpose Contactor
Brand	ICP / Tempstar / Heil
Contact Rating	30A
Coil Voltage	24V
Poles	2
Fits Model	RGS120SEAA0AKAA
Fitment	OEM

Compatibility

Designed for the ICP/Tempstar/Heil RGS120SEAA0AKAA system and other units calling for a 2-pole, 30A contactor with a 24V coil. Confirm pole count, amp rating, and coil voltage against your existing contactor before ordering.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the electrical-panel service cover.
Document — Photograph every line, load, and coil wire before disconnecting.
Remove — Transfer wires one at a time or label them, then unscrew the old contactor from its mount.
Install — Mount the new contactor and reconnect each line, load, and 24V coil wire exactly per your photo.
Test — Restore power, start a call, and confirm the contacts pull in cleanly and the compressor and fan energize.

Signs You Need a Replacement

Pitted, burnt, or welded contacts
Loud chattering or a buzzing coil
Compressor or condenser fan won't start, or won't shut off
Visible arcing or melted contactor housing

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 30A 24V Contactor for...

$42.84

Frequently Asked Questions

Does this Contactor fit my ICP RGS120SEAA0AKAA — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RGS120SEAA0AKAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RGS120SEAA0AKAA — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu