Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A 24V Contactor for RGS102LSBB0AAA — Definite Purpose | Ships Today
ICP

ICP 2-Pole 30A 24V Contactor for RGS102LSBB0AAA — Definite Purpose | Ships Today

SKU: 1178074 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This OEM 2-pole, 30-amp definite purpose contactor (part #1178074) with a 24V coil is the main switching relay for the ICP Tempstar Heil RGS102LSBB0AAA. The contactor is what energizes the high-voltage loads — the compressor and condenser fan motor — when the 24V control signal from the thermostat closes its coil. When energized, the coil pulls the two power contacts closed to deliver line voltage; when the call ends, a spring opens them. Contactors are high-wear parts: their contacts arc every cycle, eventually pitting, welding shut, or failing to close. A failed contactor is one of the most common causes of an outdoor unit that hums but won't start, runs continuously, or won't run at all.

Specifications

Spec Value
Part Number 1178074
Type Definite Purpose Contactor, 2-Pole
Brand ICP / Tempstar / Heil
Contact Rating 30 Amps
Coil Voltage 24V
Poles 2
Fit OEM Replacement

Compatibility

Direct OEM replacement for the ICP Tempstar Heil RGS102LSBB0AAA. 2-pole 30A 24V definite purpose contactors are widely used across ICP-family condensing units; confirm pole count, amp rating, and 24V coil before ordering.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
  2. Access — Remove the unit's electrical access panel to expose the contactor.
  3. Document — Photograph every line, load, and coil wire before disconnecting.
  4. Remove — Transfer wires one at a time or note positions, unscrew the old contactor, and lift it out.
  5. Install — Mount the new contactor and reconnect each wire to the matching terminal per your photos.
  6. Test — Restore power and confirm the contacts pull in and the compressor/fan start on a cooling call.

Signs You Need a Replacement

  • Outdoor unit hums or buzzes but the compressor/fan won't start.
  • Pitted, burned, or welded contacts visible on the contactor.
  • Unit runs continuously and won't shut off (contacts stuck closed).
  • Chattering coil or intermittent cooling operation.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS102LSBB0AAA — Definite Purpose | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS102LSBB0AAA — Definite Purpose | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS102LSBB0AAA — Definite Purpose | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online