What amp contactor do I need for my ICP system?

The correct replacement for ICP model RGS101LRBA0AAAA — Definite Purpose | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101LRBA0AAAA — Definite Purpose | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 30A 24V Contactor for RGS101LRBA0AAAA — Definite Purpose | Ships Today

Name: ICP 2-Pole 30A 24V Contactor for RGS101LRBA0AAAA — Definite Purpose | Ships Today
Brand: ICP
SKU: 1178074
Price: 38.94 USD
Availability: InStock

SKU: 1178074 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 2-pole, 30-amp, 24-volt definite-purpose contactor (P/N 1178074) fits the ICP / Tempstar / Heil RGS101LRBA0AAAA. The contactor is the electrical switch that energizes the load when the 24V control circuit calls; its coil pulls the contacts closed to pass line power, then drops out when the call ends. Pitted or welded contacts, a chattering coil, or a coil that no longer pulls in are the classic failure modes — they cause no-start conditions, buzzing, or contacts that stick closed and won't shut off.

Specifications

Spec	Value
Part Number	1178074
Type	Definite-Purpose Contactor
Brand	ICP / Tempstar / Heil
Poles	2
Contact Rating	30 A
Coil Voltage	24 V
Fitment	OEM direct replacement

Compatibility

Built for the ICP-made RGS101LRBA0AAAA and other Tempstar, Heil, Comfortmaker, and ICP units that use a 2-pole 30A 24V definite-purpose contactor. Confirm pole count, contact amperage, and coil voltage against your existing part before ordering.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter.
Access — Remove the electrical/control compartment service panel.
Document — Photograph every line, load, and coil wire before disconnecting.
Remove — Label and remove the wires, then unscrew the old contactor from its mount.
Install — Mount the new contactor and reconnect line, load, and 24V coil leads exactly per your photo.
Test — Restore power, trigger a call, and confirm the contactor pulls in cleanly and drops out fully.

Signs You Need a Replacement

Pitted, burned, or welded contacts
Loud buzzing or chattering when energized
System won't start despite a valid call
Contactor sticks closed and won't shut off

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 30A 24V Contactor for...

$38.94

Frequently Asked Questions

Does this Contactor fit my ICP RGS101LRBA0AAAA — Definite Purpose | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RGS101LRBA0AAAA — Definite Purpose | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RGS101LRBA0AAAA — Definite Purpose | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu