Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A 24V Contactor for RGS090LTCA0AAA — OEM 1178074 | Ships Today
ICP

ICP 2-Pole 30A 24V Contactor for RGS090LTCA0AAA — OEM 1178074 | Ships Today

SKU: 1178074 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is the genuine OEM 2-pole, 30-amp definite-purpose contactor (part number 1178074) with a 24-volt coil, built for the ICP / Tempstar / Heil RGS090LTCA0AAA system. A contactor is the high-current switch that energizes the compressor and outdoor fan whenever the thermostat sends a 24V signal to the coil. Over thousands of cycles the silver contact points pit, burn, and weld; the coil can also fail open or chatter. When that happens the system may fail to start, buzz loudly, short-cycle, or run continuously even after the call for cooling ends. Replacing a worn 30A 24V contactor with the correct OEM part restores clean, reliable switching and protects the more expensive compressor from voltage damage.

Specifications

Spec Value
Part Number 1178074
Type Definite-Purpose Contactor, 2-Pole
Brand ICP (Tempstar / Heil)
Contact Rating 30A
Coil Voltage 24V
Poles 2
Fitment OEM exact-fit

Compatibility

Designed for the ICP-family RGS090LTCA0AAA and shared platforms marketed as Tempstar, Heil, and Comfortmaker. Verify your model and serial number, and confirm a 24V coil and 30A 2-pole footprint before installing.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker. Verify zero voltage with a multimeter at the contactor line terminals.
  2. Access — Remove the electrical service panel to expose the contactor.
  3. Document — Photograph every wire and terminal before disconnecting.
  4. Remove — Label and disconnect the line, load, and 24V coil wires, then unbolt the old contactor from the bracket.
  5. Install — Mount the new 1178074 contactor and reconnect each wire to the matching terminal per your photo.
  6. Test — Restore power and confirm the contactor pulls in on a call and drops out cleanly when satisfied.

Signs You Need a Replacement

  • Loud buzzing or chattering from the contactor on startup.
  • Burned, pitted, or welded contact points.
  • Compressor or fan won't start, or won't stop when the call ends.
  • Visible arcing, melted housing, or a coil that won't pull the contacts in.

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS090LTCA0AAA — OEM 1178074 | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS090LTCA0AAA — OEM 1178074 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS090LTCA0AAA — OEM 1178074 | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online