ICP 2-Pole & 3-Pole Contactor Set for RGS213HFEA0AAAA — 30A/40A 24V | Ships Today

Overview

This listing covers genuine ICP / Tempstar / Heil contactors for model RGS213HFEA0AAAA: a 2-pole 30-amp contactor (part 1171554) and a 3-pole 40-amp contactor (part 1172449), both with a 24-volt coil. A contactor is the electrically operated switch that closes the high-voltage circuit to the compressor and condenser fan when the thermostat calls for cooling. The 24V coil pulls the contacts closed; line voltage then passes through to the load. Over time the contacts pit, burn, and weld from arcing, and the coil can fail open. Symptoms include a system that won't start, a humming contactor that won't pull in, or a compressor that won't shut off because the contacts have welded closed.

Specifications

Compatibility

Fits the ICP / Tempstar / Heil model RGS213HFEA0AAAA and related units that use these contactors. Match the pole count (2 or 3) and amp rating (30A or 40A) to the contactor you are replacing, and confirm a 24V control coil before ordering.

Installation Guide

1. Safety First — Disconnect power at the disconnect and breaker; verify zero voltage with a multimeter.
2. Access — Remove the condenser or electrical access panel.
3. Document — Photograph all line, load, and 24V coil connections before disconnecting.
4. Remove — Transfer wires one at a time, or label them, then unscrew and lift out the old contactor.
5. Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo.
6. Test — Restore power and confirm the contactor pulls in on a cooling call and drops out when satisfied.

Signs You Need a Replacement

• Contactor hums but won't pull the contacts in
• Burnt, pitted, or welded contacts
• Compressor that won't start or won't shut off
• Open or burnt 24V coil reading on a meter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.