Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 18A Contactor for RYB023GAA — 24V Coil | Ships Today
ICP

ICP 2-Pole 18A Contactor for RYB023GAA — 24V Coil | Ships Today

SKU: 60126456 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This OEM 2-pole definite purpose contactor (part #60126456) is the primary switching device for the ICP RYB023GAA condensing unit. Energized by a 24-volt control signal from the thermostat circuit, its 18-amp rated contacts close to deliver line voltage to the compressor and condenser fan motor. When the contactor fails, the system either will not start or, in the case of welded contacts, will not shut off. Common failure modes include pitted or burned contacts, a chattering or open coil, and insect or debris intrusion that prevents the armature from pulling in cleanly. Replacing a worn contactor restores reliable, clean switching and protects the compressor from low-voltage and short-cycling damage.

Specifications

Spec Value
OEM Part Number 60126456
Type Definite Purpose Contactor
Poles 2-Pole
Contact Rating 18 Amps
Coil Voltage 24V
Brand ICP
Fitment OEM Replacement

Compatibility

Engineered as a direct OEM replacement for the ICP / Tempstar / Heil RYB023GAA condensing unit. Also commonly used across matching ICP-family air conditioners and heat pumps that originally shipped with a 2-pole 18A 24V-coil contactor. Always confirm the existing contactor's pole count, amp rating, and coil voltage before installing.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter across the line terminals.
  2. Access — Remove the condensing unit's service panel to expose the control compartment.
  3. Document — Photograph all line, load, and coil wiring before disconnecting anything.
  4. Remove — Label and disconnect the wires, then unscrew the old contactor from its bracket.
  5. Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo, ensuring the two 24V coil leads are correct.
  6. Test — Restore power, call for cooling, and confirm the contactor pulls in and the compressor and fan energize.

Signs You Need a Replacement

  • System won't start, or you hear a buzzing/chattering from the contactor.
  • Outdoor unit keeps running after the thermostat is satisfied (welded contacts).
  • Visible pitting, arcing marks, or melted plastic on the contactor body.
  • Intermittent cooling and short-cycling traced to the control circuit.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RYB023GAA — 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RYB023GAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RYB023GAA — 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online