What amp contactor do I need for my ICP system?

The correct replacement for ICP model WJH360000K000A1 — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WJH360000K000A1 — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 1-Pole 40A Contactor for WJH360000K000A1 — 24V Coil | Ships Today

Name: ICP 1-Pole 40A Contactor for WJH360000K000A1 — 24V Coil | Ships Today
Brand: ICP
SKU: 1173690
Price: 35.04 USD
Availability: InStock

SKU: 1173690 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM single-pole definite-purpose contactor (part #1173690) rated 40 amps with a 24-volt coil, built for ICP, Heil, and Tempstar heat pump and condensing units including the WJH360000K000A1. The contactor acts as the high-current switch that energizes the compressor and outdoor fan motor on every call for cooling. A 24V signal from the control transformer pulls the coil in, closing the line-voltage contacts. After years of cycling, the contacts pit and burn while the coil weakens, leading to a compressor that hums but won't start, audible chattering, a unit that won't shut off, or a completely dead outdoor section.

Specifications

Spec	Value
Part Number	1173690
Type	Single-Pole (1P) Definite Purpose Contactor
Brand	ICP / Heil / Tempstar
Contact Rating	40 Amps
Coil Voltage	24V
Poles	1
Fitment	OEM Replacement

Compatibility

Direct OEM replacement for the ICP/Heil/Tempstar WJH360000K000A1 and other WJH360000 series units that use a 40A 1-pole 24V coil contactor. Confirm amp rating, pole count, and coil voltage against your existing part before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter at the contactor terminals.
Access — Remove the condensing unit service/access panel.
Document — Photograph every wire and terminal position before disconnecting.
Remove — Transfer line and load wires one at a time, disconnect the two 24V coil leads, and unbolt the old contactor.
Install — Mount the new contactor and reconnect line, load, and 24V coil wires exactly per your photo.
Test — Restore power, call for cooling, and verify the contactor pulls in cleanly and the compressor and fan start.

Signs You Need a Replacement

Compressor hums or buzzes but will not start
Loud chattering or clicking at the contactor
Outdoor unit runs nonstop and won't shut off (welded contacts)
Visibly pitted, burned, or corroded contacts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 1-Pole 40A Contactor for WJH...

$35.04

Frequently Asked Questions

Does this Contactor fit my ICP WJH360000K000A1 — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP WJH360000K000A1 — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP WJH360000K000A1 — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu