What amp contactor do I need for my ICP system?

The correct replacement for ICP model YJ060G — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YJ060G — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 1-Pole 35A Contactor for YJ060G — 24V Coil | Ships Today

Name: ICP 1-Pole 35A Contactor for YJ060G — 24V Coil | Ships Today
Brand: ICP
SKU: 1050839-GEN
Price: 24.95 USD
Availability: InStock

SKU: 1050839-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The OEM 1050839 contactor is the high-voltage relay that powers the compressor and condenser fan on your ICP / Heil / Tempstar YJ060G unit. It is a single-pole (1-pole) contactor rated for 35 amps with a 24V control coil. When the thermostat calls, the 24V coil pulls the contacts closed and energizes the compressor; when the call ends, the contacts open and shut the unit down. Pitted, welded, or chattering contacts are one of the most common causes of an outdoor unit that won't start or won't shut off.

Specifications

Spec	Value
Part Number	1050839
Type	Single-Pole (1-Pole) Contactor
Brand	ICP / Heil / Tempstar
Rating	35 Amps
Coil Voltage	24V
Poles	1
Application	AC / Heat Pump Compressor
Fits Model	YJ060G

Compatibility

Designed for the ICP/Heil/Tempstar/Comfortmaker YJ060G 5-ton condenser and shares part number 1050839 across the family. Confirm pole count (1-pole), amperage (35A), and 24V coil voltage on your existing contactor before ordering.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter.
Access — Remove the electrical service panel on the condenser.
Document — Photograph all line, load, and 24V coil connections before disconnecting.
Remove — Disconnect the wires, unscrew the contactor from the bracket, and lift it out.
Install — Mount the new contactor and reconnect every wire exactly per your photo, including the 24V coil leads.
Test — Restore power, place a cooling call, and confirm the contacts pull in and the compressor starts.

Signs You Need a Replacement

Outdoor unit won't start even though the thermostat is calling
Unit won't shut off (contacts welded closed)
Loud buzzing or chattering from the contactor
Burned, pitted, or melted contact points

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 1-Pole 35A Contactor for YJ0...

$24.95

Frequently Asked Questions

Does this Contactor fit my ICP YJ060G — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YJ060G — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YJ060G — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu