What amp contactor do I need for my ICP system?

The correct replacement for ICP model YD060GA — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YD060GA — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 1-Pole 35A Contactor for YD060GA — 24V Coil | Ships Today

Name: ICP 1-Pole 35A Contactor for YD060GA — 24V Coil | Ships Today
Brand: ICP
SKU: 14306503
Price: 31.20 USD
Availability: InStock

SKU: 14306503 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The ICP single-pole contactor (OEM part 14306503) is the high-voltage switch that powers the compressor and outdoor fan on the YD060GA. A 24V signal from the thermostat energizes the contactor coil, pulling the contacts closed to feed line voltage to the condensing unit. Rated at 35 amps with a 24-volt coil, this 1-pole contactor is a frequent wear item — its contacts pit and burn from repeated arcing, and the coil can fail open. Telltale symptoms include a humming or chattering contactor, pitted/welded contacts, or an outdoor unit that won't start even though the thermostat is calling for cooling. Replacing a worn contactor restores reliable compressor switching.

Specifications

Spec	Value
Part Number	14306503
Type	Definite Purpose Contactor, 1-Pole
Brand	ICP (Tempstar / Heil / Comfortmaker)
Contact Rating	35A
Coil Voltage	24V
Poles	1
Application	AC/heat pump compressor & condenser fan

Compatibility

OEM replacement for ICP model YD060GA and matching Tempstar, Heil, and Comfortmaker outdoor units using a 1-pole 35A 24V-coil contactor, part 14306503. Confirm pole count, amp rating, and coil voltage against your existing contactor before installing.

Installation Guide

Safety First — Disconnect power at the breaker and outdoor disconnect, then verify zero voltage with a multimeter.
Access — Remove the outdoor unit's electrical-access service panel.
Document — Photograph all line, load, and 24V coil connections before disconnecting.
Remove — Label and remove each wire, unscrew the contactor from its bracket, and lift it out.
Install — Mount the new 35A contactor, then reconnect line, load, and 24V coil leads exactly per your photo.
Test — Restore power, call for cooling, and confirm the contactor pulls in and the compressor starts.

Signs You Need a Replacement

Loud humming, buzzing, or chattering from the contactor
Pitted, burned, or welded contacts
Outdoor unit won't start on a cooling call
24V coil reads open or fails to pull the contacts closed

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 1-Pole 35A Contactor for YD0...

$31.20

Frequently Asked Questions

Does this Contactor fit my ICP YD060GA — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YD060GA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YD060GA — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu