What amp contactor do I need for my ICP system?

The correct replacement for ICP model YD048GA — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YD048GA — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 1-Pole 30A Contactor for YD048GA — 24V Coil | Ships Today

Name: ICP 1-Pole 30A Contactor for YD048GA — 24V Coil | Ships Today
Brand: ICP
SKU: 14306502
Price: 31.20 USD
Availability: InStock

SKU: 14306502 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM single-pole 30-amp contactor (part number 14306502) is the switching relay that powers the compressor and condenser fan on the ICP/Tempstar/Heil YD048GA. When the thermostat calls for cooling, the 24V coil pulls the contacts closed and sends line voltage to the outdoor unit. Contactors fail from pitted or welded contacts, a burned-out coil, or chattering — symptoms that range from a unit that won't start to one that won't shut off. This is a 1-pole, 30A device with a 24VAC holding coil.

Specifications

Spec	Value
Part Number	14306502
Type	Definite Purpose Contactor, 1-Pole
Brand	ICP / Tempstar / Heil / Comfortmaker
Contact Rating	30 Amps
Poles	1
Coil Voltage	24 VAC

Compatibility

Direct OEM replacement for the ICP/Tempstar/Heil YD048GA and other ICP-family condensing units that use the 14306502 contactor. Verify pole count (1), amp rating (30A), and coil voltage (24V) against your existing part before installing.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage across the contactor terminals with a multimeter.
Access — Remove the condensing unit service panel.
Document — Photograph all line, load, and 24V coil wires before disconnecting.
Remove — Move each wire to the matching terminal on the new contactor one at a time, or unscrew the old contactor from its bracket.
Install — Mount the new contactor and reconnect every wire per your photo.
Test — Restore power and call for cooling to confirm the contactor pulls in and the compressor and fan start.

Signs You Need a Replacement

Outdoor unit won't start even though the thermostat calls for cooling
Compressor or fan runs continuously and won't shut off (welded contacts)
Loud buzzing, humming, or chattering from the contactor
Visible pitting, arcing, or burn marks on the contacts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 1-Pole 30A Contactor for YD0...

$31.20

Frequently Asked Questions

Does this Contactor fit my ICP YD048GA — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YD048GA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YD048GA — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu