What amp contactor do I need for my ICP system?

The correct replacement for ICP model WPG3304060RKC1 — 24V Coil with Shunt | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3304060RKC1 — 24V Coil with Shunt | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 1-Pole 30A Contactor for WPG3304060RKC1 — 24V Coil with Shunt | Ships Today

Name: ICP 1-Pole 30A Contactor for WPG3304060RKC1 — 24V Coil with Shunt | Ships Today
Brand: ICP
SKU: 1172472
Price: 41.60 USD
Availability: InStock

SKU: 1172472 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 1-pole, 30-amp contactor with a 24V coil and integral shunt (P/N 1172472) is the high-voltage switch that energizes the compressor and condenser fan in your ICP Tempstar Heil WPG3304060RKC1. When the thermostat calls for cooling, the 24V coil pulls the contacts closed to pass line voltage to the loads. Pitted, welded, or chattering contacts are a frequent cause of a unit that won't start, won't shut off, or buzzes loudly at the contactor.

Specifications

Spec	Value
Part Number	1172472
Type	Definite Purpose Contactor, 1-Pole, with Shunt
Brand	ICP (Tempstar / Heil / Comfortmaker)
Contact Rating	30A
Coil Voltage	24V
Poles	1
Fits Model	WPG3304060RKC1
Fitment	OEM Direct Replacement

Compatibility

Direct OEM replacement for the ICP Tempstar Heil WPG3304060RKC1 and related WPG-series units that use a 1-pole 30A 24V contactor. Confirm pole count, amp rating, and coil voltage against your existing part.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter.
Access — Remove the electrical compartment service panel.
Document — Photograph all line, load, and coil wiring before disconnecting.
Remove — Transfer the wires one at a time, remove the mounting screws, and pull the old contactor.
Install — Mount the new contactor and reconnect each wire exactly per your photo.
Test — Restore power and confirm the contacts pull in on a cooling call and the compressor and fan energize cleanly.

Signs You Need a Replacement

Compressor/fan won't start or won't shut off
Loud buzzing or chattering at the contactor
Burned, pitted, or welded contacts
Coil fails to pull the contacts in on a 24V call

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 1-Pole 30A Contactor for WPG...

$41.60

Frequently Asked Questions

Does this Contactor fit my ICP WPG3304060RKC1 — 24V Coil with Shunt | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP WPG3304060RKC1 — 24V Coil with Shunt | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP WPG3304060RKC1 — 24V Coil with Shunt | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu