Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 1-Pole 30A Contactor for WPA4424000RKA1 — 24V Coil w/ Shunt | Ships Today
ICP

ICP 1-Pole 30A Contactor for WPA4424000RKA1 — 24V Coil w/ Shunt | Ships Today

SKU: 1172472 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is the OEM definite-purpose contactor (Part #1172472) for the ICP WPA4424000RKA1 condenser unit. The contactor is the high-voltage relay that switches line power to the compressor and condenser fan motor whenever the 24-volt control circuit calls for cooling. This is a single-pole (1P) unit rated for 30 amps with a 24-volt coil and an integrated shunt. When a contactor fails, the most common symptoms are an outdoor unit that hums but won't start, contacts that weld shut so the compressor never shuts off, or pitted/burned contacts that cause intermittent operation and chattering. Replacing a worn contactor is one of the most common and cost-effective HVAC repairs.

Specifications

Spec Value
Part Number 1172472
Type 1-Pole (Single-Pole) Contactor with Shunt
Brand ICP / Tempstar / Heil
Amp Rating 30 A
Coil Voltage 24 VAC
Poles 1
Fitment OEM Replacement

Compatibility

Engineered as the factory replacement for the ICP WPA4424000RKA1 air conditioner / heat pump condenser. The WPA series is sold under the ICP family of brands including Tempstar, Heil, Comfortmaker, Arcoaire, and KeepRite. Always confirm your existing contactor is a 30A 1-pole, 24V coil unit before ordering.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage across the contactor terminals with a multimeter.
  2. Access — Remove the condenser service panel.
  3. Document — Photograph all line, load, and 24V coil wires before disconnecting.
  4. Remove — Label and disconnect each wire, then unscrew the old contactor from its mounting bracket.
  5. Install — Mount the new contactor, then reconnect line, load, and coil wires exactly per your photo.
  6. Test — Restore power, call for cooling, and verify the contactor pulls in cleanly and the compressor and fan energize.

Signs You Need a Replacement

  • Outdoor unit hums or buzzes but the compressor won't start.
  • Burned, pitted, or melted contact points.
  • Compressor runs continuously and won't shut off (welded contacts).
  • Loud chattering or clicking when the system cycles.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP WPA4424000RKA1 — 24V Coil w/ Shunt | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP WPA4424000RKA1 — 24V Coil w/ Shunt | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP WPA4424000RKA1 — 24V Coil w/ Shunt | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online