What amp contactor do I need for my ICP system?

The correct replacement for ICP model YL024GB1 — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YL024GB1 — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 1-Pole 25A Contactor for YL024GB1 — 24V Coil | Ships Today

Name: ICP 1-Pole 25A Contactor for YL024GB1 — 24V Coil | Ships Today
Brand: ICP
SKU: 1050699
Price: 36.40 USD
Availability: InStock

SKU: 1050699 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM single-pole contactor (part number 1050699) is the switching relay for the ICP/Tempstar/Heil YL024GB1 condensing unit. Rated at 25 amps with a 24V coil, the contactor energizes when the thermostat calls for cooling, closing its contacts to deliver line voltage to the compressor and condenser fan motor. Contactors are a high-wear component because their contacts arc every time they open and close. Common failure symptoms include the outdoor unit not starting, a chattering or buzzing contactor, pitted or welded contacts that won't release, or an ant/insect-fouled coil that won't pull in.

Specifications

Spec	Value
Part Number	1050699
Type	Definite Purpose Contactor, 1-Pole
Brand	ICP / Tempstar / Heil
Contact Rating	25 Amps
Coil Voltage	24V
Poles	1
Fitment	OEM Replacement

Compatibility

Direct OEM replacement for the ICP/Tempstar/Heil YL024GB1 and related condensing units using the 1050699 25A single-pole contactor. Confirm pole count, amp rating, and 24V coil against your existing part.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter.
Access — Remove the condenser service panel.
Document — Photograph all line, load, and 24V coil wiring before disconnecting.
Remove — Label and disconnect the wires, unscrew the contactor from its bracket, and lift it out.
Install — Mount the new contactor and reconnect every wire exactly per your photo.
Test — Restore power and call for cooling to confirm the contactor pulls in and the unit starts.

Signs You Need a Replacement

Outdoor unit won't start on a cooling call
Loud buzzing or chattering from the contactor
Pitted, burned, or welded contacts
Coil does not pull the contacts in even with 24V present

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 1-Pole 25A Contactor for YL0...

$36.40

Frequently Asked Questions

Does this Contactor fit my ICP YL024GB1 — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YL024GB1 — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YL024GB1 — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu