Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 1-Pole 25A Contactor for YJ018GA3 — 24V Coil | Ships Today
ICP

ICP 1-Pole 25A Contactor for YJ018GA3 — 24V Coil | Ships Today

SKU: 1050699 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is a genuine OEM single-pole definite purpose contactor (part number 1050699) for the ICP / Tempstar / Heil YJ018GA3 heat pump. The contactor is a 24V-coil-activated switch rated for 25 amps that energizes the compressor and outdoor fan motor whenever the thermostat calls for cooling or heating. When the 24V control signal reaches the coil, the magnetic field pulls the contacts closed and sends line voltage to the condensing unit. Common failure symptoms include a buzzing or chattering outdoor unit, pitted or welded contacts that prevent the unit from shutting off, and a compressor that will not start because the contacts no longer close. A worn contactor is one of the most frequent causes of a no-cooling service call.

Specifications

Spec Value
Part Number 1050699
Type Single-Pole (1-Pole) Definite Purpose Contactor
Brand ICP / Tempstar / Heil
Contact Rating 25 Amps
Coil Voltage 24V
Fits Model YJ018GA3

Compatibility

Engineered for the ICP / Tempstar / Heil YJ018GA3 outdoor condensing unit and other compatible ICP-family heat pump and air conditioner systems that use a 25A, 24V single-pole contactor. Always confirm the original part number and coil voltage before installing.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.
  2. Access — Remove the service panel from the condensing unit to expose the control compartment.
  3. Document — Photograph all line- and low-voltage wires before disconnecting anything.
  4. Remove — Note the L1/L2 line leads, the compressor and fan loads, and the two 24V coil wires, then disconnect them and unscrew the old contactor from the bracket.
  5. Install — Mount the new contactor and reconnect each wire exactly per your photo.
  6. Test — Restore power and confirm the contactor pulls in and the unit starts on a cooling/heating call.

Signs You Need a Replacement

  • Loud buzzing, humming, or chattering from the outdoor unit
  • Burned, pitted, or melted contacts visible on the contactor
  • Compressor and fan will not start even though 24V is present at the coil
  • Unit will not shut off because the contacts are welded closed

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP YJ018GA3 — 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP YJ018GA3 — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP YJ018GA3 — 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online