What amp contactor do I need for my ICP system?

The correct replacement for ICP model YJ018G — 24V Coil OEM 1050699 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YJ018G — 24V Coil OEM 1050699 | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 1-Pole 25A Contactor for YJ018G — 24V Coil OEM 1050699 | Ships Today

Name: ICP 1-Pole 25A Contactor for YJ018G — 24V Coil OEM 1050699 | Ships Today
Brand: ICP
SKU: 1050699
Price: 32.44 USD
Availability: InStock

SKU: 1050699 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 1-pole 25-amp contactor (part 1050699) switches line power to the compressor and outdoor fan in your ICP / Tempstar / Heil YJ018G condensing unit. Its 24V coil is energized by the thermostat call; the contacts then close to deliver high-voltage power to the compressor. Over time the contacts pit, corrode, or weld from arcing, and the coil can burn out — resulting in a unit that hums but won't start, chatters, or won't shut off. Rated at 25 amps with a single pole and a 24-volt control coil, it's one of the most common outdoor-unit replacement parts.

Specifications

Spec	Value
Part Number	1050699
Type	Definite Purpose Contactor
Brand	ICP / Tempstar / Heil
Poles	1-Pole
Contact Rating	25A
Coil Voltage	24V
Fitment	OEM Replacement

Compatibility

Direct OEM fit for the ICP / Tempstar / Heil YJ018G condensing unit and related ICP-family models that use the 1-pole 25A, 24V-coil contactor part 1050699.

Installation Guide

Safety First — Disconnect power at the breaker and disconnect; verify zero voltage with a multimeter.
Access — Remove the condenser electrical access panel.
Document — Photograph all line, load, and 24V coil wiring before disconnecting.
Remove — Transfer wires one at a time or label them, then unscrew and remove the old contactor.
Install — Mount the new 1050699 contactor, reconnect line/load and 24V coil leads per your photo.
Test — Restore power and confirm the contactor pulls in on a cooling call and the compressor starts.

Signs You Need a Replacement

Unit hums but compressor/fan won't start
Contactor chatters or buzzes loudly
Pitted, burned, or welded contacts
Unit won't shut off when the call ends

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 1-Pole 25A Contactor for YJ0...

$32.44

Frequently Asked Questions

Does this Contactor fit my ICP YJ018G — 24V Coil OEM 1050699 | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YJ018G — 24V Coil OEM 1050699 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YJ018G — 24V Coil OEM 1050699 | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu