What amp contactor do I need for my ICP system?

The correct replacement for ICP model YG042GC9 — 24V Coil OEM 1050699 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YG042GC9 — 24V Coil OEM 1050699 | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 1-Pole 25A Contactor for YG042GC9 — 24V Coil OEM 1050699 | Ships Today

Name: ICP 1-Pole 25A Contactor for YG042GC9 — 24V Coil OEM 1050699 | Ships Today
Brand: ICP
SKU: 1050699
Price: 36.34 USD
Availability: InStock

SKU: 1050699 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM single-pole (1P) 25-amp contactor with a 24V coil (part number 1050699) for the ICP / Heil / Tempstar YG042GC9 heat pump. The contactor is the high-voltage switch for the outdoor unit: when the thermostat sends a 24V signal to the coil, the contactor pulls in and passes line voltage to the compressor and condenser fan motor. A worn contactor develops pitted, burned, or welded contacts that cause hard starts, chatter, or a unit that won't shut off.

Specifications

Spec	Value
Part Number	1050699
Part Type	Definite Purpose Contactor
Poles	1 (single-pole)
Contact Rating	25A
Coil Voltage	24V
Brand	ICP / Heil / Tempstar
Fit	OEM replacement

Compatibility

Factory replacement contactor for the ICP / Heil / Tempstar YG042GC9 condensing unit. As an ICP family part, OEM 1050699 also fits the equivalent Comfortmaker, Heil, and Tempstar units that shipped with this 1-pole 25A 24V-coil contactor.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker. Verify zero voltage with a multimeter.
Access — Remove the condenser service panel.
Document — Photograph all line, load, and 24V coil connections before disconnecting.
Remove — Disconnect the wires, release the mounting screws/clip, and remove the old contactor.
Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo.
Test — Restore power and confirm the contactor pulls in on a call and the compressor/fan energize cleanly.

Signs You Need a Replacement

Unit won't start, or chatters/buzzes when calling for cooling
Pitted, blackened, or welded-together contacts
Compressor and fan won't shut off when the call ends
Burnt smell or melted housing at the contactor

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 1-Pole 25A Contactor for YG0...

$36.34

Frequently Asked Questions

Does this Contactor fit my ICP YG042GC9 — 24V Coil OEM 1050699 | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YG042GC9 — 24V Coil OEM 1050699 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YG042GC9 — 24V Coil OEM 1050699 | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu