Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 1-Pole 25A Contactor for YG036GA2 — 24V Coil | Ships Today
ICP

ICP 1-Pole 25A Contactor for YG036GA2 — 24V Coil | Ships Today

SKU: 1050699 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is a genuine OEM single-pole contactor (part #1050699) for the ICP/Tempstar/Heil YG036GA2 heat pump. The contactor is the electromagnetic switch that energizes the compressor and condenser fan motor whenever the 24V control circuit calls for cooling or heating. Rated at 25 amps with a 24-volt coil, it carries line voltage to the outdoor unit's high-draw components. When a contactor fails, the most common symptoms are a unit that hums but won't start, contacts that weld shut (compressor runs continuously), pitted or burned contacts, or chattering caused by a weak coil. Because the contacts arc every time the system cycles, this is one of the most common wear items in any outdoor condensing unit.

Specifications

Spec Value
Part Number 1050699
Type Single-Pole (1P) Contactor
Brand ICP / Tempstar / Heil
Contact Rating 25 Amps
Coil Voltage 24V
Poles 1
Fitment OEM

Compatibility

Engineered as the factory replacement for the ICP/Tempstar/Heil YG036GA2 heat pump. The 24V coil and 25A single-pole rating also match many comparable 2-3 ton ICP-family condensing units that use the same control platform. Always confirm the existing contactor's pole count, amp rating, and coil voltage against this part before installing.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.
  2. Access — Remove the condensing unit's electrical access panel.
  3. Document — Photograph all wire positions before disconnecting anything.
  4. Remove — Label and disconnect the line, load, and 24V coil leads, then unscrew the old contactor from its bracket.
  5. Install — Mount the new contactor, reconnect each wire to the matching terminal per your photo.
  6. Test — Restore power and confirm the contactor pulls in and the compressor/fan start on a cooling call.

Signs You Need a Replacement

  • Outdoor unit hums or buzzes but the compressor and fan won't start
  • Visibly pitted, burned, or melted contacts
  • Compressor runs nonstop because contacts are welded closed
  • Chattering or intermittent operation from a weak 24V coil

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP YG036GA2 — 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP YG036GA2 — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP YG036GA2 — 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online