ICP 1-Pole 25A Contactor for YG030GA2 — 24V Coil | Ships Today

Overview

This OEM 1-pole, 25-amp contactor (Part #1050699) with a 24V control coil is the high-voltage switch that powers your ICP unit's compressor and condenser fan. When the thermostat calls for cooling, the 24V coil pulls in the contacts to deliver line voltage; when the call ends, the contacts open. Over time the contacts pit, arc, and weld, or the coil burns out — leaving the outdoor unit dead, chattering, or stuck running. Symptoms include a unit that won't start, a buzzing/chattering contactor, burnt or pitted contacts, or a compressor that won't shut off. A new 25A contactor restores clean, reliable switching and protects the compressor from voltage drop.

Specifications

Compatibility

Direct OEM fit for ICP-family condensing units including model YG030GA2, and shared across matching Tempstar, Heil, and Comfortmaker outdoor units. Verify the 1-pole, 25A, 24V-coil configuration and part number 1050699 before ordering.

Installation Guide

1. Safety First — Disconnect power and verify zero voltage with a multimeter.
2. Access — Remove the service panel to reach the control box.
3. Document — Photograph all line, load, and 24V coil connections before disconnecting.
4. Remove — Transfer one wire at a time, or label each lead, then unscrew and remove the old contactor.
5. Install — Mount the new contactor and reconnect line, load, and coil wires per your photo.
6. Test — Restore power and confirm the contactor pulls in cleanly and the compressor/fan start.

Signs You Need a Replacement

• Outdoor unit won't start on a cooling call.
• Loud buzzing or chattering from the contactor.
• Contacts are burnt, pitted, or welded shut.
• Compressor runs continuously and won't cycle off.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.