What amp contactor do I need for my ICP system?

The correct replacement for ICP model YG024GA2 — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YG024GA2 — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 1-Pole 25A Contactor for YG024GA2 — 24V Coil | Ships Today

Name: ICP 1-Pole 25A Contactor for YG024GA2 — 24V Coil | Ships Today
Brand: ICP
SKU: 1050699
Price: 37.64 USD
Availability: InStock

SKU: 1050699 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine ICP single-pole 25-amp contactor (OEM part 1050699) is the electrical relay that powers your YG024GA2 condensing unit's compressor and condenser fan. Its 24V coil is energized by the thermostat, pulling the contacts closed to send line voltage to the compressor. Contactors are high-wear parts: their contacts pit, burn, and weld over thousands of cycles. Symptoms of a failing 1-pole 25A contactor include a chattering or humming contactor, an outdoor unit that won't start, contacts that stick closed (unit runs constantly), or visibly burned/pitted contact points. Replacing a worn contactor restores reliable starting and protects the compressor from low-voltage damage.

Specifications

Spec	Value
Part Number	1050699
Type	Definite Purpose Contactor
Brand	ICP (Tempstar / Heil)
Poles	1-Pole
Contact Rating	25 Amps
Coil Voltage	24V AC
Fitment	OEM Replacement

Compatibility

Direct OEM fit for the ICP/Tempstar/Heil YG024GA2 heat pump/condensing unit and other ICP-family models using a 1-pole, 25A, 24V-coil contactor. Verify pole count, amperage, and coil voltage against your existing part before installing.

Installation Guide

Safety First — Disconnect power at the breaker and pull the outdoor disconnect; verify zero voltage with a multimeter.
Access — Remove the condensing unit's electrical access panel.
Document — Photograph every line, load, and 24V coil wire before disconnecting.
Remove — Label and disconnect all wires, then unscrew the old contactor from its mounting bracket.
Install — Mount the new 1-pole 25A contactor and reconnect each wire exactly per your photo.
Test — Restore power and call for cooling; confirm the contactor pulls in cleanly and the compressor starts.

Signs You Need a Replacement

Loud chattering or humming when the unit tries to start.
Outdoor unit fails to start even though the thermostat is calling.
Contacts welded closed, causing the unit to run nonstop.
Visibly pitted, burned, or corroded contact points.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 1-Pole 25A Contactor for YG0...

$37.64

Frequently Asked Questions

Does this Contactor fit my ICP YG024GA2 — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YG024GA2 — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YG024GA2 — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu