What amp contactor do I need for my ICP system?

The correct replacement for ICP model YC030G — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YC030G — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 1-Pole 25A Contactor for YC030G — 24V Coil | Ships Today

Name: ICP 1-Pole 25A Contactor for YC030G — 24V Coil | Ships Today
Brand: ICP
SKU: 14306501
Price: 42.84 USD
Availability: InStock

SKU: 14306501 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM single-pole definite purpose contactor (OEM part number 14306501) is the electrical switch that energizes the outdoor compressor and condenser fan on your ICP/Tempstar/Heil YC030G heat pump. When the thermostat calls for cooling or heating, the 24-volt control circuit pulls in the contactor coil, closing the 25-amp line-voltage contacts that deliver power to the compressor. A failed contactor is one of the most common reasons an outdoor unit will not start. Pitted, burned, or welded contacts cause hard starting, chattering, or a unit that hums but never runs; a burned-out 24V coil leaves the system completely dead at the condenser. Replacing this inexpensive part restores reliable switching and protects the far more expensive compressor.

Specifications

Spec	Value
Part Number	14306501
Type	Single-Pole (1P) Definite Purpose Contactor
Brand	ICP (Tempstar / Heil)
Contact Rating	25 Amps
Coil Voltage	24 VAC
Poles	1
Fit	OEM Replacement

Compatibility

Engineered as a direct OEM fit for the ICP / Tempstar / Heil YC030G heat pump condensing unit. This contactor also appears across many ICP family single-phase 24V condensers; verify your existing contactor reads 1-pole, 25A, with a 24V coil before ordering.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the condenser electrical access panel.
Document — Take a clear photo of every wire on the contactor before disconnecting anything.
Remove — Label and disconnect the line, load, and 24V coil wires; unscrew the old contactor from the bracket.
Install — Mount the new contactor and reconnect each wire exactly as photographed.
Test — Restore power, call for cooling, and confirm the contactor pulls in cleanly and the compressor and fan start.

Signs You Need a Replacement

Outdoor unit hums or buzzes but the compressor and fan do not start.
Visible pitting, burning, or melted plastic on the contact points.
Chattering or rapid clicking when the thermostat calls.
Contacts stuck closed so the unit runs continuously, or an open 24V coil that reads no continuity.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 1-Pole 25A Contactor for YC0...

$42.84

Frequently Asked Questions

Does this Contactor fit my ICP YC030G — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YC030G — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YC030G — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu