What HP motor do I need for my ICP unit?

The correct replacement for ICP model WPG4604090LKA1 — 810 RPM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4604090LKA1 — 810 RPM | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP 1/5 HP Condenser Fan Motor for WPG4604090LKA1 — 810 RPM | Ships Today

Name: ICP 1/5 HP Condenser Fan Motor for WPG4604090LKA1 — 810 RPM | Ships Today
Brand: ICP
SKU: WPG4604090LKA1
Price: 207.94 USD
Availability: InStock

SKU: WPG4604090LKA1 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The 1186359 is a genuine OEM 1/5 HP, 810 RPM condenser fan motor for the ICP / Tempstar / Heil WPG4604090LKA1 packaged gas-electric unit. This motor drives the outdoor fan that pulls air across the condenser coil, rejecting the heat your system removes from the home. Without it, head pressure climbs, the compressor overheats, and the unit trips on its high-pressure or overload protection. A condenser fan motor that runs slow, hot, or noisy is on its way out and risks taking the compressor with it — making timely replacement a smart repair.

Specifications

Spec	Value
Part Number	1186359
Type	Condenser Fan Motor
Brand	ICP / Tempstar / Heil
Horsepower	1/5 HP
Speed	810 RPM
Application	Outdoor condenser fan
Fit	OEM direct replacement

Compatibility

Built for the ICP WPG4604090LKA1 and shared across many Tempstar, Heil, and Comfortmaker packaged units using a 1/5 HP, 810 RPM condenser motor. Match the horsepower, RPM, rotation, shaft diameter, and run-capacitor MFD to your existing motor before installing.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter and discharge the run capacitor.
Access — Remove the top fan grille/panel to reach the motor and fan blade.
Document — Photograph all wiring, blade depth, and rotation orientation before disconnecting.
Remove — Loosen the blade set screw, pull the blade, unbolt the old motor from the bracket, and disconnect the leads.
Install — Mount the new motor, set the blade to the same depth, and reconnect the leads and capacitor exactly per your photo.
Test — Restore power, make a cooling call, and confirm the fan spins the correct direction at full speed.

Signs You Need a Replacement

Condenser fan won't start, runs slow, or stops when hot
Loud grinding, squealing, or rattling from the outdoor unit
A/C trips the breaker or locks out on high pressure
Motor housing is hot to the touch or smells burnt

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 1/5 HP Condenser Fan Motor f...

$207.94

Frequently Asked Questions

Does this Fan Motor fit my ICP WPG4604090LKA1 — 810 RPM | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WPG4604090LKA1 — 810 RPM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WPG4604090LKA1 — 810 RPM | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu