What igniter fits my ICP furnace?

The correct replacement for ICP model RGS150HFCB0AAAA — with Wiring Harness | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS150HFCB0AAAA — with Wiring Harness | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

Heil Hot Surface Igniter Kit for RGS150HFCB0AAAA — with Wiring Harness | Ships Today

Name: Heil Hot Surface Igniter Kit for RGS150HFCB0AAAA — with Wiring Harness | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.70 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (HSI) is what lights the burners on your ICP / Tempstar / Heil RGS150HFCB0AAAA gas furnace. On a call for heat, the control board sends 120V to the igniter, which glows white-hot and ignites the gas as the valve opens. We bundle the igniter (OEM 1171306) with the matching igniter wiring kit (OEM 1188370) so you replace the brittle, heat-stressed element and its connector together — the most reliable repair. Hot surface igniters are fragile and degrade with every heating cycle. Common failure symptoms include no ignition and the furnace locking out, a cracked or visibly broken element, the igniter glowing but the burners never lighting, or repeated short-cycling on ignition failure.

Specifications

Spec	Value
Part Number	1171306 (igniter) + 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Operating Voltage	120 VAC
Includes	Igniter element + wiring harness kit
Fitment	OEM

Compatibility

Directly fits the ICP/Tempstar/Heil RGS150HFCB0AAAA gas furnace and other models sharing the same igniter assembly. The included wiring kit ensures a clean connection to the furnace control board.

Installation Guide

Safety First — Shut off gas and disconnect power; verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter mounting and wire routing before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw; handle the old element by the ceramic base only.
Install — Mount the new igniter without touching the element surface, then connect the new wiring kit to the board.
Test — Restore gas and power, start a heat cycle, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace locks out with no ignition
Cracked, chipped, or visibly broken igniter element
Igniter glows but burners never light
Repeated short-cycling on ignition failure

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Heil Hot Surface Igniter Kit for...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP RGS150HFCB0AAAA — with Wiring Harness | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS150HFCB0AAAA — with Wiring Harness | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS150HFCB0AAAA — with Wiring Harness | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu