OEM Carrier Condenser Fan Motor 1/4 HP 1100 RPM for Model PY1PPB048090NBAA

This is the factory OEM replacement condenser fan motor (part number HC39GR234) for the Carrier PY1PPB048090NBAA packaged unit. The condenser fan motor drives the outdoor fan blade that exhausts heat from the refrigerant coil. When this motor fails, the condenser cannot reject heat — causing the compressor to trip on high-pressure lockout, the system to short-cycle, or the unit to run warm with zero cooling output. Common failure signs include a humming outdoor unit with a non-spinning fan, a hot condenser cabinet, or a motor that runs briefly and then cuts out on thermal overload.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | CWLE rotation | Frame 48 | 0.5" shaft diameter | 1.5" shaft length | Vertical mount only
• OEM vs Generic: This is a genuine Carrier factory-authorized part (GE/Genteq 5KCP39GGY910S platform), precision-wound to exact torque and thermal-overload specs. Generic motors frequently run outside rated RPM and amperage, accelerating blade wear and risking compressor damage from inadequate heat rejection.
• Install difficulty: 3/5 — Requires disconnecting line-voltage wiring at the motor terminals and removing the fan blade from the shaft (blade puller recommended). Tools needed: multimeter, 5/16" and 3/8" nut drivers, blade puller, torque wrench. Always replace the run capacitor at the same time — a faulty capacitor is a leading cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Directly fits Carrier PY1PPB048090NBAA packaged gas/electric units. Verify voltage, HP, RPM, and rotation direction on your unit's data plate before ordering. Cross-references GE/Genteq model 5KCP39GGY910S. Have questions about fitment? Our HVAC parts specialists will verify compatibility before your order ships.