OEM Carrier Condenser Fan Motor 1/8 HP 825 RPM for Model PY1PPB030060AAAA

This is the genuine OEM factory-replacement condenser fan motor for the Carrier PY1PPB030060AAAA packaged unit. The condenser fan motor drives the outdoor fan blade that exhausts heat from the refrigerant coil. When this motor fails, the condenser coil overheats, causing the compressor to trip on high-pressure lockout — or the outdoor fan simply stops spinning entirely. Left unaddressed, a failed condenser fan motor will lead to compressor damage and a far more expensive repair.

• Specs: 1/8 HP | 825 RPM | 208–230V | 60 Hz | Single Phase (1 PH) | 0.90A Full Load Amps | PSC (Permanent Split Capacitor) motor type | Clockwise rotation | Continuous duty rating
• OEM vs Generic: This OEM unit is manufactured to Carrier's exact factory tolerances for shaft diameter, rotation direction, mounting configuration, and thermal overload protection — eliminating the fitment and premature-failure risks common with off-brand replacements. Replaces superseded part numbers HC35GE235A and GE/Genteq model 5KCP39FFS244CS.
• Install difficulty: 3/5 — Requires disconnecting 240V power and safely discharging the run capacitor before removal. Tools needed: multimeter, nut driver set, needle-nose pliers, wire stripper. Always photograph the existing wiring harness before disconnecting. Pro tip: replace the run capacitor at the same time — a weak capacitor is often the root cause of motor burnout and will shorten the life of a brand-new motor.
• Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Orders placed before cutoff ship same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PY1PPB030060AAAA packaged unit. Always verify horsepower, RPM, voltage, rotation, and shaft diameter against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order if you have any doubt.