OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PY1PNB036060NBAA

This is the OEM factory-specified condenser fan motor (part #HC39GR234) for the Carrier PY1PNB036060NBAA split-system condenser. Manufactured by Genteq (model 5KCP39GGY910S) to Carrier's exact factory tolerances, this motor drives the condenser fan blade to pull air across the coil and reject heat from the refrigerant circuit. When this motor fails, the condenser loses airflow, refrigerant pressure spikes, and the system trips on high-pressure lockout — leaving you with no cooling. Common symptoms include the outdoor fan not spinning while the compressor hums, the unit overheating and shutting off within minutes of starting, or a seized motor with a burning smell from the cabinet.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1.5 Amps | 1100 RPM | CWLE rotation (counter-clockwise looking at shaft end) | Frame 48Y | 5/8" shaft diameter | 1.5" shaft length | Three-wire connection | Vertical mount only
• OEM vs Generic: This OEM Carrier/Genteq motor is wound and balanced to exact factory spec — ensuring correct RPM, rotation direction, and thermal protection ratings. Generic aftermarket motors often deviate in rotation or RPM, risking premature blade wear, compressor overheating, and voided equipment warranties.
• Install difficulty: 3/5 — Requires disconnecting line-voltage power at the disconnect box and capacitor discharge before removal. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, needle-nose pliers, multimeter, and a capacitor discharge tool. Always photograph existing wiring and rotation direction before removing the old motor. Note: Always replace the run capacitor when replacing the motor — a degraded capacitor is a leading cause of motor re-failure.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed as the factory replacement for Carrier model PY1PNB036060NBAA. Also cross-references Carrier/Bryant/Payne part number HC39GR234A. Verify voltage, HP, RPM, and rotation on your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment before you buy — don't guess on a motor.