OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PY1PNB036060AAAA

This is the factory OEM condenser fan motor (part number HC39GR234) for the Carrier PY1PNB036060AAAA split-system air conditioner. The condenser fan motor drives the outdoor unit's fan blade, pulling air across the condenser coil to reject heat and keep the refrigerant cycle running efficiently. When this motor fails, the condenser unit may run briefly before shutting down on high-pressure lockout, blow warm air, or the outdoor fan may stop spinning entirely while the compressor continues to hum — a sure sign of impending compressor damage if left unaddressed.

• Specs: 1/4 HP | 208–230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | Frame 48 | CWLE rotation | 0.5" shaft diameter | 1.5" shaft length | Vertical mount only
• OEM vs Generic: This is a Carrier factory-authorized OEM motor manufactured to exact tolerance and balance specs. Generic motors often deviate in rotation direction, shaft diameter, or RPM — risking fan blade incompatibility and shortened service life.
• Install difficulty: 3/5 — Disconnect power and discharge capacitor before beginning. Tools needed: 5/16" and 3/8" nut drivers, adjustable wrench, multimeter, wire connectors. Always photograph existing wiring and note fan blade pitch/direction before removal. Replace the run capacitor at the same time to prevent premature motor failure.
• Warranty: 1-year OEM factory warranty. In stock — ships same business day from our warehouse.

Compatibility: Designed as the direct OEM replacement for Carrier model PY1PNB036060AAAA. Verify horsepower, voltage, RPM, rotation, and shaft dimensions against your unit's data plate before ordering. GE/Genteq model cross-reference: 5KCP39GGY910S. Our parts specialists are available to confirm fitment before you order — no guesswork needed.