OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PY1PJB048130AAAA

This is the genuine OEM factory-specified condenser fan motor (part# HC39GR234) for the Carrier PY1PJB048130AAAA split-system heat pump. The condenser fan motor drives the outdoor fan blade to pull air across the coil, rejecting heat during cooling mode and absorbing it during heating mode. When this motor fails, the outdoor fan stops spinning — causing the compressor to overheat, trip the high-pressure limit, and shut down the entire system. Common symptoms include a buzzing outdoor unit with no fan movement, intermittent cooling loss on hot days, or a tripped breaker after short run cycles.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | CWLE Rotation | Frame 48 | 0.5" Shaft Diameter | 1.5" Shaft Length | 60 Hz
• OEM vs Generic: This is a genuine Carrier factory part built to exact tolerances for the PY1PJB048130AAAA. Generic motors often vary in shaft length, rotation direction, and bearing grade — leading to vibration, premature failure, or mismatched airflow. OEM guarantees a drop-in fit with no modifications.
• Install difficulty: 3/5 — Disconnect power at the breaker and capacitor before removing the motor. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and needle-nose pliers. Always photograph all wiring connections before disconnecting. Note: It is strongly recommended to replace the run capacitor at the same time — a worn capacitor can cause the new motor to overheat and fail prematurely.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Factory-matched for Carrier model PY1PJB048130AAAA. Verify HP, voltage, RPM, rotation, and shaft diameter on your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy — just reach out before checkout.