OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PY1PJB048090AAAA

This is the OEM factory-specified condenser fan motor for the Carrier PY1PJB048090AAAA packaged unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat and maintaining system efficiency. When this motor fails, the condenser coil overheats, triggering high-pressure lockout or compressor shutdown — leaving you with a system that short-cycles, runs warm, or won't start at all. Noisy operation, slow blade spin-up, or a motor that runs hot to the touch are early warning signs of impending failure.

• Specs: 1/4 HP | 208-230V | 1.5 Amps | 1100 RPM | Single Phase | 60 Hz | CWLE Rotation | Frame 48 | 0.5" Shaft Diameter | OEM Part # HC39GR234 (superseded by HC39GE238)
• OEM vs Generic: This OEM motor is wound and balanced to Carrier factory tolerances, ensuring correct RPM under load and proper airflow across the condenser coil. Generic motors may list the same specs but frequently run off-speed, increasing head pressure and shortening compressor life.
• Install Difficulty: 3/5 — Disconnect power and lock out the unit before starting. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and a fan blade puller. Always photograph wiring harness and blade pitch before disassembly. It is strongly recommended to replace the run capacitor at the same time — a failing capacitor is often the root cause of motor burnout and will prematurely destroy a new motor if left in place.
• Warranty: 1-year OEM factory warranty. In stock — ships same business day from our warehouse.

Compatibility: Engineered for the Carrier PY1PJB048090AAAA packaged unit. Verify voltage, HP, RPM, and rotation direction on your unit's data plate before ordering. Not sure it fits? Our HVAC parts specialists verify fitment before you order — reach out before you buy.