OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 825 RPM for Model PH4ANG060000BCAA

This factory-spec condenser fan motor is the correct OEM replacement for the Carrier PH4ANG060000BCAA heat pump condenser unit. The condenser fan motor drives the outdoor fan blade, pulling air across the refrigerant coil to dissipate heat during cooling and reject heat during heating cycles. When this motor fails, the outdoor unit will overheat, trip the high-pressure limit, and shut down — leaving you with no cooling or heating. Common symptoms include a humming outdoor unit with no fan movement, intermittent shutdown on hot days, or a seized, noisy motor bearing.

• Specs: 1/4 HP | 208-230V AC | 825 RPM | 1.20 Amp | 60 Hz | 1-Phase | 48Y Frame | Clockwise rotation (shaft up) | GE/Genteq model 5KCP39LFY534AS
• OEM vs Generic: This is an OEM-grade direct replacement engineered to Carrier factory tolerances. Generic motors vary in RPM calibration and bearing quality, which can shorten compressor life by reducing airflow and raising head pressure.
• Install difficulty: 3/5 — Requires disconnecting line voltage at the disconnect box and discharging any capacitor before handling. Tools needed: 1/4" and 5/16" nut drivers, wire strippers, multimeter, and needle-nose pliers. Always photograph all wiring connections before removal. Capacitor replacement at the same time is strongly recommended to prevent premature motor re-failure.
• Warranty: 1-year OEM replacement warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered as a direct replacement for Carrier model PH4ANG060000BCAA condenser units. OEM part number HC39GE242 (also cross-references HC39GE242A). Verify HP, RPM, voltage, and rotation on your unit's data plate before ordering. Our team is available to confirm fitment — order with confidence.