OEM Carrier Condenser Fan Motor 1/12 HP 800 RPM for Model PH4ANG024000BAAA

This OEM condenser fan motor (part number HC31GE229, superseded by HB32GR229) is the factory-specified replacement for the Carrier PH4ANG024000BAAA heat pump condensing unit. Manufactured by GE for Carrier, this motor drives the outdoor fan blade that continuously moves air across the condenser coil to reject heat. When this motor fails, the condenser coil overheats, triggering high-pressure lockout — your system will either shut down entirely, short-cycle rapidly, or run continuously without effective cooling. You may also hear the compressor humming while the outdoor fan blade sits completely still.

• Specs: 1/12 HP | 208–230V | 800 RPM | 0.50A | 60 Hz | 1-Phase | PSC (Permanent Split Capacitor) | Frame 48Y | 5-5/8" diameter | 2" shaft extension | Counterclockwise rotation (shaft up) | Thermally protected | Class B insulation
• OEM vs Generic: This is a genuine Carrier OEM motor manufactured by GE to exact factory tolerances. Generic aftermarket motors often deviate in RPM calibration and thermal protection ratings, leading to premature compressor strain and shortened equipment life. OEM ensures a drop-in fit with zero modification.
• Install difficulty: 3/5 — Requires disconnecting power at the breaker and discharging the run capacitor before any work begins. Tools needed: 1/4" and 5/16" nut drivers, wire strippers, needle-nose pliers, and a multimeter. Photograph all wiring connections before disconnecting. Pro tip: Replace the run capacitor at the same time — a weak capacitor is a leading cause of motor failure and will shorten the life of a brand-new motor.
• Warranty & Shipping: Backed by a 1-year OEM factory warranty. In stock and ships same business day from our warehouse. Free standard shipping included.

Compatibility: Engineered for Carrier PH4ANG024000BAAA heat pump condensing units. Also cross-references as HC31GE229A, HB32GR229, HB32GQ230, GE 5KCP39EFY445AS, and ICP/Heil/Tempstar 1173716. Always verify horsepower, voltage, RPM, and rotation direction against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order.