OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM — Model PH2PNB048000AB

This is the factory-specified OEM condenser fan motor for the Carrier PH2PNB048000AB 4-ton packaged heat pump unit. The condenser fan motor draws heat-laden refrigerant air across the outdoor coil, rejecting heat to the atmosphere. When this motor fails, the condenser coil overheats, triggering high-pressure lockout — your system will short-cycle, blow warm air, or shut down entirely within minutes of startup. A failed motor is often accompanied by a humming sound, visible blade stoppage, or a tripped breaker.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | Frame 48 | 0.5" shaft diameter | 1.5" shaft length | CWLE rotation | Vertical mount only
• OEM vs Generic: This OEM motor is wound and balanced to exact Carrier factory tolerances. Generic motors often run at looser RPM and amperage specs, shortening compressor life by reducing coil airflow. OEM is always the recommended choice for longevity.
• Install difficulty: 3/5 — Requires disconnecting line voltage at the disconnect box and discharging the run capacitor before removal. Tools needed: 5/16" and 3/8" nut drivers, wire stripper, multimeter, and needle-nose pliers. Always photograph existing wiring and motor orientation before disconnecting. Note: It is strongly recommended to replace the run capacitor at the same time — a capacitor out of tolerance can cause premature motor failure.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered as the direct OEM replacement for Carrier PH2PNB048000AB packaged heat pump units. OEM part number HC39GR234 has been superseded by HC39GE238 — both numbers are cross-referenced and fulfilled. Verify horsepower, voltage, and RPM against your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy.