OEM Carrier Condenser Fan Motor 1/5 HP 208-230V 825 RPM for Model PH13PR048000ACAA
This is the genuine OEM replacement condenser fan motor for the Carrier PH13PR048000ACAA heat pump / air conditioner. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to dissipate heat from the refrigerant. When this motor fails, the outdoor unit will overheat, trip the high-pressure limit, and shut down — leaving your home without cooling or heating. Common symptoms include the condenser fan not spinning, the unit short-cycling, or the system running but producing no conditioned air.
-
Specs: 1/5 HP | 208-230V, 60 Hz, 1-Phase | 825 RPM | 0.95 A Full-Load Amperage | Frame 48 | CWLE (Counter-Clockwise Looking from Lead End) Rotation | 0.5" Diameter × 1.9" Long Shaft | Stud Mountable | Closed Enclosure
-
Required Capacitor: This motor requires a 7.5 MFD 370V run capacitor (sold separately). Always replace the run capacitor when replacing the motor — a capacitor out of tolerance is a leading cause of premature motor failure.
-
OEM vs Generic: Genuine Carrier OEM motors (HC37GE210 / HC38GE231) are wound and balanced to exact factory tolerances for the PH13PR048000ACAA, ensuring proper RPM, airflow, and efficiency ratings. Generic aftermarket motors often deviate in rotation, shaft dimensions, or amperage draw — risking compressor damage from inadequate heat rejection.
-
Install Difficulty: 3/5 — Disconnect and lock out power before starting. Tools needed: nut driver set, wire stripper, multimeter, and capacitor discharge tool. Photograph all wiring and blade orientation before removal. Verify new motor rotation (CWLE) before securing fan blade. Check blade balance after reinstallation.
-
Warranty: 1-year OEM factory warranty. In-stock units ship same business day from our warehouse.
Compatibility: Fits Carrier model PH13PR048000ACAA R-410A heat pump condensers. OEM part numbers covered: HC37GE210 (primary) and HC38GE231 (alternate). Verify motor specs against your unit's data plate before ordering. Our fitment team is available to confirm compatibility — contact us before you order.