OEM Carrier Control Transformer 60VA 115/208/230V-24V for Model PH13NR06000GAEAA

This is the factory-authorized OEM control transformer for the Carrier PH13NR06000GAEAA heat pump system. The transformer steps down high-voltage power (115/208/230V primary) to the 24V AC control circuit voltage that energizes your thermostat, contactor coil, and all low-voltage controls. When this transformer fails, the entire control circuit goes dead — your thermostat goes blank, the system won't respond to any commands, and no heating or cooling is possible. A failed transformer is often identified by a blown fuse on the control board, a burning smell, or a tripped breaker on the secondary side.

• Specs: 60 VA power rating | 115/208/230 VAC primary (multi-tap) | 24 VAC secondary | Foot-mounted design | 50/60 Hz | OEM Part Number: HT01AW229
• OEM vs Generic: This is a Factory Authorized Parts (FAP) OEM unit built to Carrier's exact VA rating and insulation class. Generic transformers are often undersized in VA capacity, leading to overheating and premature failure under peak control-circuit loads.
• Install difficulty: 2/5 — Always disconnect power at the disconnect box before servicing. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter (to verify output voltage after install). Photograph all wire connections before disconnecting. Check and replace the secondary-side fuse if blown.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse.

Compatibility: Designed and factory-specified for the Carrier PH13NR06000GAEAA heat pump. Verify your unit's data plate shows a 115/208/230V primary control transformer before ordering. Compatible with units using the HT01AW229 or HT01AW229A designation. Have questions about fitment? Our HVAC parts specialists verify compatibility before you order — reach out today and we'll ship fast.