OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PH13NR06000GAAAA

This is the genuine OEM condenser fan motor for the Carrier PH13NR06000GAAAA heat pump, carrying factory part numbers HC39GE237 and HC40GE232. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coils to reject heat absorbed from your home. When this motor fails, airflow across the coil stops — causing the refrigerant to overheat, the high-pressure limit to trip, and the system to shut down on a no-cool or lockout fault. Common failure signs include a humming outdoor unit with a stationary fan blade, intermittent shutdowns on hot days, or a motor that is hot to the touch and won't restart.

• Specs: 1/4 HP | 1100 RPM | 208-230V | Single-phase | 48 Frame | CWLE rotation (Clockwise, Lead End) | 1.40 Amp | Factory OEM part numbers HC39GE237 / HC40GE232
• OEM vs Generic: This is a factory-authorized Carrier OEM motor wound and balanced to exact factory tolerances. Generic drop-in replacements may vary in RPM, rotation direction, or shaft diameter — risking blade wobble, bearing wear, and premature compressor failure from inadequate condenser cooling.
• Install difficulty: 3/5 — Disconnect power at the breaker and capacitor before touching motor leads. Tools needed: 1/4" and 5/16" nut drivers, multimeter, fan blade puller (recommended), wire stripper, and needle-nose pliers. Always photograph wiring before disconnecting. Verify rotation direction (CWLE) before powering up.
• Warranty: 1-year OEM factory warranty against defects in materials and workmanship. In-stock and ships same business day from our warehouse.

Compatibility: Factory-specified for Carrier PH13NR06000GAAAA heat pump condensing units. Also cross-references HC39GE237A, HC40GE232A, and Genteq 5KCP39FGS071S. Verify HP, RPM, voltage, and rotation direction on your unit's data plate before ordering. Our team is available to confirm fitment prior to purchase — reach out before you order.