OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for PH13NR060000AEAA

This is a genuine OEM Carrier condenser fan motor (part numbers HC39GE237 and HC40GE232), factory-specified for the Carrier PH13NR060000AEAA heat pump condenser. Manufactured by GE Genteq to Carrier's exact specifications, this motor spins the outdoor fan blade to draw air across the condenser coil, rejecting heat in cooling mode and absorbing it in heating mode. When this motor fails, you'll typically notice the outdoor fan not spinning while the compressor hums, the system tripping on high-pressure lockout, or the unit shutting down within minutes due to overheating. A failed motor left unaddressed can cause compressor damage — one of the most expensive repairs in any HVAC system.

• Specs: 1/4 HP | 208-230V, 1-Phase, 60 Hz | 1100 RPM | Frame 48Y (5-5/8" diameter) | 1.40 Amps | CW rotation (lead end) | 1.5" shaft extension | 3-wire | Requires 5 MFD 370V run capacitor (sold separately)
• OEM vs Generic: This genuine Carrier/GE Genteq motor is wound and balanced to factory tolerances, ensuring correct airflow CFM, amp draw within nameplate spec, and full bearing-life expectancy. Generic aftermarket motors frequently run outside rated RPM and amp draw, stressing the compressor and shortening system life.
• Install Difficulty: 3/5 — Disconnect and lock out power at the breaker before opening the condenser cabinet. Tools needed: 1/4" and 5/16" nut drivers, adjustable pliers, wire nuts, multimeter. Photograph all wiring connections before disconnecting leads. Transfer the existing fan blade carefully — fan blade pullers are recommended to avoid shaft damage.
• Warranty: 1-year OEM Carrier factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PH13NR060000AEAA heat pump condenser. Also replaces HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and GE Genteq model 5KCP39EGS070S. Verify horsepower, voltage, RPM, and rotation direction on your unit's motor data plate before ordering. Our team is available to confirm fitment before you buy.