OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH13NR060000ADAA

This is a genuine OEM condenser fan motor — the factory-specified replacement for the Carrier PH13NR060000ADAA heat pump condenser unit. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to dissipate heat during cooling and absorb it during heating. When this motor fails, the outdoor unit will overheat, trigger high-pressure lockout, or shut down entirely within minutes of startup — leaving you with no cooling or heating until the fault is corrected.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | Frame 48Y | 1.40 Amp | CW Rotation (CWLE) | 5/8" shaft | Requires 5 MFD / 370V run capacitor
• OEM vs Generic: OEM motors are wound and balanced to exact factory tolerances for the PH13NR060000ADAA. Generic motors often deviate in RPM, amperage draw, and shaft fit — risking compressor thermal overload and voiding equipment warranties.
• Install difficulty: 3/5 — Requires disconnecting line voltage at the disconnect box before opening the unit. Tools needed: 5/16" nut driver, wire stripper, multimeter, and blade puller (recommended). Always photograph existing wiring before removal. Note: discharge the run capacitor before touching motor terminals.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered as the direct OEM replacement for Carrier model PH13NR060000ADAA. OEM part numbers: HC39GE237 (primary) and HC40GE232 (alternate supersession). Cross-references include HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and GE/Genteq model 5KCP39EGS070S. Verify HP, voltage, RPM, and rotation direction on your unit's data plate before ordering. Our team can confirm fitment — contact us before you buy.