OEM Carrier Condenser Fan Motor 1/4 HP 1100 RPM 208-230V for Model PH13NR04800GAAAA

This is a genuine OEM Carrier condenser fan motor (part numbers HC39GE237 and HC40GE232), factory-specified for the Carrier PH13NR04800GAAAA heat pump condenser unit. The condenser fan motor drives the fan blade that pulls ambient air across the condenser coil, dissipating heat absorbed from your home and rejecting it to the outdoors. Without a functioning fan motor, refrigerant cannot reject heat efficiently — causing high-pressure lockouts, compressor overheating, and total system shutdown, especially on hot days when you need cooling most.

• Specs: 1/4 HP | 208-230V, 1-Phase, 60 Hz | 1100 RPM | Frame 48Y (5-5/8" diameter) | CW rotation (lead end) | 1.5" shaft extension | 3-wire | Requires 5 MFD / 370V run capacitor (sold separately)
• OEM vs Generic: OEM motors are wound and balanced to Carrier factory tolerances, ensuring correct airflow CFM, amp draw within nameplate specs, and full thermal protection. Generic aftermarket motors often deviate in rotation direction, shaft length, or amp draw — risking compressor damage or voiding system warranties.
• Install difficulty: 3/5 — Disconnect power and verify capacitor is discharged before beginning. Tools needed: 1/4" and 5/16" nut drivers, adjustable wrench, multimeter, and blade puller (recommended). Photograph all wiring and note fan blade pitch/orientation before removal. Verify rotation direction and shaft specs against your unit's data plate before installation.
• Warranty: 1-year OEM manufacturer warranty. In-stock units ship same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PH13NR04800GAAAA heat pump condensers. Also supersedes part numbers HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and GE/Genteq model 5KCP39EGS070S. Always confirm HP, voltage, RPM, rotation, and shaft dimensions against your unit's motor data plate before ordering. Our fitment team is available to verify compatibility before you buy.