OEM Carrier Condenser Fan Motor 1/5 HP 825 RPM 208-230V for Model PH13NR048000AEAA

This OEM condenser fan motor is the factory-specified replacement for the Carrier PH13NR048000AEAA heat pump condenser unit, covering OEM part numbers HC37GE210 and HC38GE231. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat during cooling and absorb heat during heating. When this motor fails, common symptoms include the outdoor unit running with no airflow, the system short-cycling on high-pressure lockout, or the compressor overheating and tripping its thermal overload — all resulting in a no-cool or no-heat condition.

• Specs: 1/5 HP | 825 RPM | 208-230V | 60 Hz | 1-Phase | 0.95A FLA | Frame 48 | CWLE Rotation | 1/2" Diameter × 1.9" Shaft | Stud Mountable | TEAO Enclosure | Sleeve Bearings
• Capacitor Note: This motor requires a 7.5 MFD 370V run capacitor (sold separately). Always replace the run capacitor whenever replacing the motor — a degraded capacitor is a leading cause of premature motor failure due to overheating.
• OEM vs Generic: OEM motors are wound to Carrier's exact factory torque, RPM, and thermal protection specifications. Generic aftermarket motors often deviate in rotation direction, shaft length, or amperage draw, risking fan blade incompatibility or compressor damage from inadequate airflow.
• Install Difficulty: 3/5 — Requires disconnecting power at the disconnect box and confirming capacitor is fully discharged before handling wiring. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and a helper to support the fan assembly. Photograph all wiring connections before removal. Professional installation recommended.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Designed for the Carrier PH13NR048000AEAA R-410A heat pump condenser. Also cross-references OEM part numbers HC37GE210A and HC37GE208A. Verify HP, RPM, voltage, rotation direction, and shaft dimensions against your unit's data plate before ordering. Our parts specialists are available to confirm fitment — contact us before you order if you have any questions.