OEM Carrier Condenser Fan Motor 1/5 HP 825 RPM for Model PH13NR048000ACAA

This is the factory OEM condenser fan motor for the Carrier PH13NR048000ACAA heat pump condenser, covering both part numbers HC37GE210 and HC38GE231. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat and cool the refrigerant. When this motor fails, the compressor loses airflow, refrigerant pressures spike, and the system will trip on high-pressure lockout or overheat — leaving you with a no-cool call in peak season. Common failure symptoms include the outdoor fan not spinning, the unit shutting off after a few minutes of run time, or a buzzing sound with no blade rotation.

• Specs: 1/5 HP | 208-230V, 60 Hz, 1-Phase | 825 RPM | 0.95–1.0 A FLA | Frame 48 | Rotation: CW (lead-end view) | Shaft: 0.5" diameter × 1.5"–1.9" long | Stud mountable | Replaces HC37GE210, HC37GE210A, HC38GE231
• OEM vs Generic: Factory-authorized OEM motors match exact torque curves, thermal overload ratings, and mounting dimensions for the PH13NR048000ACAA. Generic aftermarket motors frequently use ±10% tolerance windings, which can cause nuisance trips and reduce compressor longevity on R-410A systems.
• Install difficulty: 3/5 — Disconnect all power at the breaker before servicing the outdoor unit. Tools needed: 5/16" and 1/4" nut drivers, needle-nose pliers, wire strippers, and a multimeter. Photograph all wiring before disconnecting. Always replace the run capacitor (7.5 MFD 370V) when replacing the motor — a weak capacitor is the #1 cause of premature motor failure.
• Warranty & Shipping: 1-year OEM manufacturer warranty. In stock and ships same business day from our warehouse. Free ground shipping on orders over $99.

Compatibility: Directly fits Carrier model PH13NR048000ACAA heat pump condensing units. This motor also cross-references Bryant and Payne units sharing the HC37GE210 / HC38GE231 specification. Always verify horsepower, RPM, voltage, and rotation direction against your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy.