OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH13NR048000AAAA

This is the genuine OEM condenser fan motor for the Carrier PH13NR048000AAAA heat pump condensing unit, covering primary part number HC39GE237 and alternate part number HC40GE232. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat absorbed from your home. When this motor fails, airflow across the coil stops — causing the system to overheat, trip the high-pressure limit, and lock out on a no-cool fault. Common failure symptoms include a humming outdoor unit with a stationary fan blade, intermittent shutdowns on hot days, or a seized shaft that won't turn freely by hand.

• Specs: 1/4 HP | 208-230V, 1-Phase | 1100 RPM | 1.40 Amp | Frame 48Y | 5-5/8" diameter | CW rotation (CWLE) | 1.5" shaft extension | 3-wire | Requires 5 MFD / 370V run capacitor (sold separately)
• OEM vs Generic: OEM motors are wound and balanced to exact factory tolerances for the PH13NR048000AAAA, ensuring correct RPM, amperage draw, and rotation direction out of the box. Generic aftermarket motors frequently deviate in shaft length or rotation, risking blade interference or premature bearing failure.
• Install difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: multimeter, 5/16" and 1/4" nut drivers, slip-joint pliers for blade removal, and a marker to photograph and label wires before disconnecting. Verify rotation direction and shaft length match before securing the blade to the new motor shaft.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before 3 PM local time.

Compatibility: Designed as the factory-specified replacement for Carrier model PH13NR048000AAAA heat pump condensing units. Also cross-references Bryant and Payne models using HC39GE237, HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, HC40GE232, and GE/Genteq model 5KCP39EGS070S. Always verify HP, voltage, RPM, rotation, and shaft dimensions against your unit's motor data plate before ordering. Our parts specialists are available to confirm fitment — order with confidence and get your system back up today.