OEM Carrier Condenser Fan Motor 1/5 HP 825 RPM for Model PH13NR030000AFAA

This is the factory-authorized OEM condenser fan motor for the Carrier PH13NR030000AFAA R-410A heat pump condenser. The condenser fan motor drives the fan blade that draws ambient air across the condenser coil, dissipating heat from the refrigerant and protecting the compressor from thermal overload. When this motor fails, you'll typically notice the outdoor unit running with no fan movement, the compressor tripping on high-pressure lockout, warm air at the supply registers, or a complete system shutdown due to overheating. Replacing the motor promptly prevents compressor damage — the most costly repair in any HVAC system.

• Specs: 1/5 HP | 208-230V, 60 Hz, 1-Phase | 825 RPM | 0.95A Full-Load | Frame 48 | CWLE Rotation (clockwise lead-end) | 0.5" diameter × 1.9" shaft | Stud mountable | Requires 7.5 MFD 370V run capacitor (sold separately)
• OEM Part Numbers: HC37GE210 (primary), HC38GE231 (superseding/alternate) — both are factory-authorized Carrier replacement motors built to exact OEM tolerances for the PH13NR030000AFAA. Also replaces HC37GE210A and HC37GE208A.
• OEM vs Generic: OEM motors are wound to factory-specified resistance and thermal protection thresholds. Generic motors frequently deviate in shaft length, rotation direction, or capacitor requirements — mismatches that cause premature bearing failure or void the system warranty. Always replace with OEM on R-410A heat pumps.
• Install Difficulty: 3/5 — Requires disconnecting line-voltage wiring and unbolting the motor from the condenser top panel. Tools needed: 5/16" and 1/4" nut drivers, wire strippers, needle-nose pliers, multimeter, and a fan blade puller. Always discharge capacitor before touching any wiring. Note: It is strongly recommended to replace the 7.5 MFD 370V run capacitor at the same time — a degraded capacitor is the #1 cause of premature fan motor failure.

Compatibility: Direct OEM replacement for Carrier model PH13NR030000AFAA heat pump condenser. Verify motor specs on your unit's data plate before ordering — confirm 208-230V single-phase, 825 RPM, and CWLE rotation. Compatible with R-410A refrigerant systems. Our team is available to confirm fitment before you order — same-business-day shipping from our warehouse on all in-stock OEM motors.