OEM Carrier Condenser Fan Motor 1/5 HP 825 RPM for Model PH13NR030000AAAA

This OEM condenser fan motor is the factory-specified replacement for the Carrier PH13NR030000AAAA R-410A heat pump condenser. The condenser fan motor drives the fan blade that pulls ambient air across the condenser coil, rejecting heat from the refrigerant and protecting the compressor from thermal overload. When this motor fails, you'll notice the outdoor unit running with no fan movement, the system tripping on high-pressure lockout, or the compressor overheating and shutting down within minutes of startup.

• Specs: 1/5 HP | 208-230V | 60 Hz | 1-Phase | 825 RPM | 0.95 A Full Load | Frame 48 | CWLE Rotation | 0.5" Diameter × 1.9" Shaft | Stud Mountable | Requires 7.5 MFD 370V Run Capacitor (sold separately)
• OEM vs Generic: OEM Carrier motors are wound and balanced to factory tolerances, ensuring correct RPM, airflow CFM, and amp draw for the PH13NR030000AAAA refrigerant circuit. Generic motors may deviate in rotation direction, shaft length, or amp draw — all of which can shorten compressor life or void equipment warranties.
• Install Difficulty: 3/5 — Disconnect and lock out power at the breaker before beginning. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, wire stripper, multimeter, and a capacitor discharge tool. Always photograph all wiring before disconnecting. Note: Replace the run capacitor at the same time — a capacitor out of tolerance is a leading cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse. Replaces OEM part numbers HC37GE210 and HC38GE231, as well as superseded numbers HC37GE210A and HC37GE208A.

Compatibility: Direct OEM replacement for Carrier model PH13NR030000AAAA R-410A heat pump condensing units. Also fits Bryant and Payne equipment sharing the same motor specification. Confirm HP, voltage, RPM, rotation, and shaft dimensions against your unit's data plate before ordering. Our fitment team is standing by to verify compatibility — contact us before you order if you have any questions.