OEM Carrier Condenser Fan Motor 1/12HP 1100RPM 208-230V for Model PH13NR02400GAFAA

This OEM condenser fan motor is the factory-specified replacement for the Carrier PH13NR02400GAFAA heat pump condensing unit. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat and maintain proper refrigerant pressures. When this motor fails, the outdoor fan stops spinning — causing the unit to overheat, trip the high-pressure limit, and shut down entirely, leaving your system unable to cool or heat. Common failure symptoms include a humming sound with no fan movement, intermittent operation, motor housing that is hot to the touch, or a complete no-cooling condition.

• Specs (HC31GE232): 1/12 HP | 1100 RPM | 208-230V | 60Hz | 0.5A | Single Phase | Frame 39 | 0.5" shaft diameter | 1.5" shaft length | CCWLE rotation
• OEM vs Generic: This OEM Factory Authorized Part is manufactured to exact Carrier design specifications, preserving your unit's efficiency rating, UL listing, and Energy Star certification. Generic aftermarket motors often deviate in shaft length, rotation, or frame tolerances — risking premature failure or voided equipment warranty.
• Install Difficulty: 3/5 — Disconnect power at the breaker and verify capacitor discharge before proceeding. Tools required: 5/16" and 3/8" nut drivers, needle-nose pliers, wire stripper, multimeter. Note fan blade pitch and orientation before removal. It is strongly recommended to replace the run capacitor at the same time, as an out-of-tolerance capacitor is a leading cause of premature motor failure.
• Warranty & Shipping: Backed by Carrier's OEM replacement warranty. Ships same business day from our warehouse. Also cross-references secondary OEM part number HC38GE231 (1/5HP 825RPM variant — verify your unit's data plate before ordering).

Compatibility: Designed as the direct OEM replacement for Carrier model PH13NR02400GAFAA heat pump condensing units. OEM part numbers HC31GE232 and HC38GE231 are both associated with this platform — confirm horsepower, RPM, and rotation on your existing motor's nameplate before selecting. Questions about fitment? Our HVAC parts specialists verify compatibility before you order — call or chat today.