OEM Carrier Condenser Fan Motor 1/5 HP 825 RPM for Model PH13NR024000ACAA

This is the factory OEM condenser fan motor for the Carrier PH13NR024000ACAA heat pump, supplied under OEM part numbers HC37GE210 and HC38GE231. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, dissipating heat from the refrigerant during the cooling cycle and extracting outdoor heat during the heating cycle. When this motor fails, the outdoor unit will run without airflow — causing the compressor to overheat, the system to short-cycle, or a complete loss of heating and cooling. Common symptoms include a humming outdoor unit with a stationary fan blade, intermittent cooling, or a tripped high-pressure limit switch.

• Specs: 1/5 HP | 208-230V | 60 Hz | Single-phase | 825 RPM | Frame 48 | CWLE rotation | 0.5" diameter × 1.9" shaft | Closed enclosure | Requires 7.5 MFD 370V run capacitor (sold separately)
• OEM vs Generic: This genuine Carrier OEM motor is wound to exact factory tolerances, ensuring correct RPM, amperage draw, and rotation direction. Aftermarket motors frequently deviate in shaft length or rotation, risking fan blade contact and premature bearing failure.
• Install Difficulty: 3/5 — Disconnect all power before servicing. Tools needed: multimeter, 5/16" and 1/4" nut drivers, needle-nose pliers, and a fan blade puller. Discharge and replace the run capacitor simultaneously to prevent premature motor failure from a weak capacitor. Always verify rotation direction (CWLE — counterclockwise when viewed from lead end) before re-connecting.
• Warranty: 1-year OEM manufacturer warranty. In-stock orders ship same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PH13NR024000ACAA heat pump condensers. Replaces OEM part numbers HC37GE210, HC37GE210A, and HC38GE231. Always confirm motor HP, RPM, voltage, and rotation on your unit's data plate before ordering. Our fitment team is available to verify compatibility before you buy.